The RGA75 Series is a 75W integrated 2U rackmount power system that incorporates system power, lock power and various combinations of AMAG controllers. RGA enclosures provide mounting for one (1) M4000 or one (1) 8DBC or smaller controller and multiple LifeSafety Power FlexPower devices in an access control system capable of controlling eight doors as a standalone or multiple doors when interconnected. LSP power modules are provided based on RGA model number and AMAG controllers are provided by the integrator based on the job requirements. Available options include single (12V DC) or dual voltage operation (12 and 24VDC), power distribution and control, individual output protection by either fuses or class 2 power limiting, buffered lock control, and remote reporting and test. Each output is protected against electrical surges caused by lightning or transients on the external wiring (SurgeShield) and each control output is individually selectable for available DC voltages, and either failsafe or failsecure operation with fire alarm interface. Optional network reporting capabilities include; operational fault status; power supply output; battery charging voltage; battery charging current; and fire alarm input status. In addition to automated and scheduled status reports, diagnostic servicing and battery load tests can be performed remotely, saving or reducing the cost of on-site servicing. The unit is intended for mounting within a standard four post EIA 19" electronics rack with a maximum depth of 36".