The RGM150 Series is a 150W integrated 2U rackmount power system that incorporates system power, lock power and Mercury controllers.

RGM enclosures provide mounting for two Mercury controllers and multiple Life-Safety Power FlexPower® devices in an access control system capable of control-ling four doors as a standalone or multiple doors when interconnected. LSP power modules are provided based on RGM model number and Mercury controllers are provided by the integrator based on the job requirements.

Available options include single (12 or 24V DC) or dual voltage operation (12 and 24V DC), power distribution and control, individual output protection by either fuses or class 2 power limiting, buffered lock control, and remote reporting and test. Each LSP output is protected against electrical surges caused by lightning or transients on the external wiring (SurgeShield™) and each LSP control output is individually selectable for available DC voltages, either failsafe or failsecure operation with fire alarm interface.

Optional network reporting capabilities include: operational fault status; power sup-ply output; battery charging voltage; battery charging current; and fire alarm input status. In addition to automated and scheduled status reports, diagnostic servicing and battery load tests can be performed remotely, saving or reducing the cost of on-site servicing.

The unit is intended for mounting within a standard four post EIA 19 inch electronics rack with a maximum depth of 36 inches.

• Integrated access system with lock and system power distributionŠ
• Compartmentalized architecture for maximum reliability
• ŠRack drawer slide assembly simplifies controller wiring and maintenance
• ŠComprehensive wire management with tie down points and articulating bracketŠ
• 120 or 230V AC user selectable input supports data center electrical systems

• Single voltage or 12 and 24VDC dual voltage options cover all access functions
• Power distribution for either direct (D8) buffered (C8) or managed (M8)
• Individual output selection for failsafe, failsecure, lock voltage and fire alarm interface
• High capacity battery charge capability
• Automotive fuses for ease of service and replaceability
• Easy door expansion with multiple Gemini drawers
• Available companion battery housing for rackmount use (part number RBE)

Network Monitoring

• Monitor/alert power supply, battery operation and faults
• Remote test battery run time, low battery and time to service alert
• Monitor/power cycle individual outputs (M8N model)
• Monitor alert external room temperature