The SD4 and SD16 smart distribution modules are the final piece for a fully remote-managed system. The SD4 and SD16 provide remote monitoring and control to previously unmonitored auxiliary devices such as access control panels, readers and REX devices. When combined with a NetLink and M8 modules, the entire access power system is now able to be remotely monitored. The SD4 and SD16 provide 4 or 16 monitored voltage outputs accessible from a network or the internet. These boards communicate with an NL4 or NLX network module (required). An on-board RS485 connection for remote monitoring by NLX allows Distributed Power Monitoring (DPM) throughout an enterprise from a single IP drop, while a temperature probe provides environmental and enclosure parameters for enclosures deployed remotely from the host NetLink module. Each output on the SD4 and SD16 is jumper programmable to either 12 or 24V when used in a dual voltage power system. OutSmart dual color LEDs visually indicate voltage levels by output (green for 12V, blue for 24V). Each output is also network-programmable for fire alarm override. The outputs may also be individually enabled / disabled through a browser interface and the voltage and current of each output may be monitored via network or internet. High and low trigger points may be set for voltage and current for each output to generate an alert when that output is outside of selected parameters.